Add a Fingerprint on the MK1000

Employee fingerprints are registered directly at the MK1000 time clock after adding the user. The device supports up to 1,000 fingerprints and allows multiple templates per user. Follow these steps to add a fingerprint and ensure proper placement for accurate verification.

To register a finger template:

1. Press [Menu].
2. Select User Mgt and press [OK].
3. Select UserView and press [OK].
4. Select the employee from the list and press [OK].
5. Select Edit and press [OK].
6. Select Finger and press [OK]. 
7. The clock will request the user to press a finger at least twice to ensure a good read. Press and quickly remove the finger for best results. 
8. When completed, the clock will return to the previous screen.
9. To record another finger: select Finger, press [OK] again, and repeat the process with a different finger.
10. Press [ESC] once.
11. Press [OK] to save the finger template(s).
12. Press [ESC] repeatedly to exit the menus or simply allow the menus to time out.

Tip: If you are adding a finger template for a manager, see Additional Punch Methods for Managers on the MK1000.

Fingerprint Verification Technique

For accurate reads:

• Place the finger flat and centered on the sensor.
• Do not press off-center or use only the tip or side of the finger.

(See diagrams below for correct placement.)