Program the CR1000: Quick Reference (with video guide)
This article provides a quick reference for programming the CR1000 Digital Time Clock & Date Stamp. Watch the video below for a walkthrough of the basic programming steps.
Buttons
Use the three buttons inside the device to navigate and change the settings on the CR1000.
| Control | Function |
| SELECT | Press SELECT to choose the desired program setting mode. The selected program mode is indicated by ▲ on the display. |
| CHANGE | Press CHANGE to cycle through the options. Press and hold to cycle through quickly. |
| SET | Press SET to save the option. After an option has been saved, continue pressing SET until the device returns to normal operation mode. |
Programming Tips
- Open the device to access the buttons.
- Flashing numbers indicate editable values.
- Printing is disabled during programming and re-enabled after returned to normal operation mode.
- Always replace and lock the cover after making changes.
Basic Steps
- To enter program mode press SELECT.
- The display will show a ▲ symbol under the “TIME” mark.
- Continue pressing SELECT until you reach the desired number or option.
- When a number flashes, it is ready to be changed.
- Use CHANGE to cycle through available options.
- Press SET to save the selected value.
- To exit program mode at any time, press SET twice and the device will return to the normal operation mode.
Menu Option Reference Guide
Use the reference guide below to explore the menu options available within the Digital Time Clock & Date Stamp.